Home page ACCESSORIES ACCESSORIES ECR-3 - Drain valve • Drain valve ECR3 is a device intended for use to evacuate the water generated due to condensation inside the enclosure. • Drain valve is assembled in the lowest part or side part of the enclosure because the water is accumulated in bottom part of enclosure. • Water will come out with the presence of drain valve device. • Made of stainless steel or galvanized steel. • Gasket is in aluminium. • O-ring is in silicon rubber. • IP66/IP67 in closed position (IP44 when installed on the bottom or on the side of enclosure*). *for detail see technical note and instruction note Quick access Contact > Downloads > News >
ECR-3 - Drain valve • Drain valve ECR3 is a device intended for use to evacuate the water generated due to condensation inside the enclosure. • Drain valve is assembled in the lowest part or side part of the enclosure because the water is accumulated in bottom part of enclosure. • Water will come out with the presence of drain valve device. • Made of stainless steel or galvanized steel. • Gasket is in aluminium. • O-ring is in silicon rubber. • IP66/IP67 in closed position (IP44 when installed on the bottom or on the side of enclosure*). *for detail see technical note and instruction note