Complete range of junction boxes designed to house Ex e and/or Ex i terminals:
  • High-quality materials: AISI316L stainless steel, GRP and copper-free aluminium,
  • Off-the-shelves configurations available in the shortest time as well as customized enclosures according to your needs,
  • Suitable for harsh environments and ensuring high resistance to corrosive agents and extreme temperatures.


Complete range of junction boxes, used for terminals wiring and granting Ex d or Ex e mode of protection:
  • Made of copper-free aluminium and complete with threaded hubs suitable for cable glands or conduit 
  • Connection does not affect the internal void, which remains available for terminals wiring 
  • Internal and external screws are made of AISI316L stainless steel.
  • Customized according to customer specifications in terms of quantity and type of operators. Our technical department will select the most suitable solution within the limits allowed by the certificate.


• Drain valve ECR3 is a device intended for use to evacuate the water generated due to condensation inside the enclosure.
• Drain valve is assembled in the lowest part or side part of the enclosure because the water is accumulated in bottom part of enclosure.
• Water will come out with the presence of drain valve device.
• Made of stainless steel or galvanized steel.
• Gasket is in aluminium.
• O-ring is in silicon rubber.
• IP66/IP67 in closed position (IP44 when installed on the bottom or on the side of enclosure*)
*for detail see technical note and instruction note