RMS 560

RMS 560
  • Complete range of explosion-proof linear lighting fixtures suitable for Zone 1, 2, 21, 22 and available with single or double lamp.
  • Suitable for ON and OFF-SHORE applications and for all industries where a high level of corrosion is present.
  • Both body and glass frame are made of stainless steel and manufactured from a single sheet of steel with no invasive mounting holes, to minimize the risk of water ingress through the housing. 
  • Design has been studied to allow operator working with free hands and no need to support any part of lighting fixture. One person can take care of start-up or maintenance without any aid and assistance. 
  • Due to inorganic materials like stainless steel and glass, RMS.. series lighting fixtures are 95% recyclable.

TECHNICAL FEATURES

Material  
 
AISI304 stainless steel, 0,8mm thickness and transparent part in tempered glass (AISI 316 L version available upon request)

 
IP rating
 
IP65 (IP66 on request)
 
Ambient temperature range -20°C to +60°C
Approvals
 
INERIS 01ATEX0060 (standard)
TR CU (marking upon request, ordering code to be required)
 
Marking
II 2 GD
Ex de IIC T(**)
Ex tD A21 IP65 T(**)
** T6/T85°C, T5/T100°C, T4/T135°C
 
Gaskets
 
Special cross-section tightness gasket, silicon rubber made (closed cell), located in housing channel between body and window frame.
 
Entries

 
Body complete of two 21mm Ø through holes (on one side) for cable entry, one complete of metallic plug with M20 locknut and gasket and the other one with temporary plastic plug to prevent dust ingress.
Hardware 
and screws
AISI304 Stainless steel external hardware and screws
 
Lamps

 
RMS series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips TL-D or equivalent (lamps excluded)
 
Ballast
 
High frequency electronic ballast conforming with EN 60079 – 15 and IEC 60079 – 15
 
Rated operation voltage (UE)
 
220-240 V


 
Frequency
 
50 – 60 Hz
 
Power factor
 
> 0,95
 

Accessories available
upon request
 

Pole mounting kit / Ceiling mounting kit / Suspension mounting kit / Wall mounting kit 3°- 4° through holes opposite side


 

Operating principles

 
Available RMS.. lighting fixtures for emergency service of one tube:
- 90 minutes ; guarantees 60’ duration with constant flux (emergency lumen factor 18%) and 30’ with decreasing flux
 
Photometric light curves

DOWNLOAD THE DOCUMENTATION

Product certificates are available in our download section.