LED RMS-560..

LED RMS-560..
RMS.. series lighting fixtures are ideally suited for ON and OFF-SHORE applications and all kinds of industries where there is an high level of corrosion. Both body and glass frame are made of stainless steel AISI304 and manufactured from a single sheet of steel with no invasive mounting holes, to minimize the risk of water ingress through the housing. Out of holes for power supply cable, whatever protected by a suitable cable gland (available upon request), there are no passing through holes between inside and outside of luminaire. Therefore during the time there is no risk of IP rating decrease as it would be possible where, for fixing devices, there are through holes and relevant gaskets. Design has been studied to allow operator working with free hands and no need to support any part of lighting fixture. One person can take care of start-up or maintenance without any aid and assistance. Due to inorganic materials like stainless steel and glass, RMS.. series lighting fixtures are 95% recyclable; only components and insulation of single core wires need some more care.

TECHNICAL FEATURES

Material 


AISI304 stainless steel, 0,8mm thickness and transparent part in tempered glass (AISI 316 L version available upon request)

IP rating

IP65

Ambient temperature range

-20°C to +60°C
Approvals

TÜV CY 17 ATEX 0205847 X

Marking
II 2 GD
Ex eb mb op is IIC T4 Gb (normal service)
Ex eb db mb op is IIC T4 Gb (emergency service)
Ex tb IIIC T135°C Db IP66

Gaskets

Special cross-section tightness gasket, silicon rubber made (closed cell), located in housing channel between body and window frame.

Entries


Body complete of two 21mm Ø through holes (on one side) for cable entry, one complete of metallic plug with M20 locknut and gasket and the other one with temporary plastic plug to prevent dust ingress.

Hardware and screws

AISI304 Stainless steel external hardware and screws

Lamps

Extended long life new LED technology with CRI > 85

Ballast

Electronic

Rated operation voltage (UE)

220-240Vac (normal and emergency service)
198-278Vdc (normal service)
 
Frequency

50-60 Hz

Power factor

> 0,95

Accessories available upon request
Pole mounting kit / Ceiling mounting kit / Suspension mounting kit / Wall mounting kit 3°- 4° through holes opposite side
   

DOWNLOAD THE DOCUMENTATION