• Complete range of explosion-proof linear lighting fixtures suitable for Zone 1, 2, 21, 22 and available with single or double lamp and ideal for applications where a continuous row of lighting is needed to ensure a uniform illumination of production sites and machinery. 
  • End-cups in copper-free aluminium granting a high resistance to corrosive environments 
  • Threelayers-extrusion lamp housing: Polycarbonate layer; Top side reflecting layer which protects inner electrical and electronic apparatus from direct sun heating/ radiation effect; Filter layer which protects inner polycarbonate layer against UV radiation and related yellowing effect. 
  • Circular shape grants the best possible “CX” factor, therefore it is less affected by wind-dusts, pollution and dirty bunching. 
  • Possibility to apply an OFF-SHORE painting cycle suitable for marine environments. 
  • All lighting fixtures are supplied ready for LOOP IN-LOOP OUT facility with cable up to 4 mm².


End cups in aluminium with low content of copper / Light housing in polycarbonate
IP rating
IP66/IK10 according to EN 62262:2002
Ambient temperature range -20°C to +55°C

INERIS 02ATEX0039X (standard) / TR CU (marking upon request, ordering code to be required)

Ex e mb IIC T4 Gb (Normal service) / Ex d e mb IIC T4 Gb (Emergency service)
EX de IIC T4 Gb (available upon request)
Ex tb IIIC T85°C Db IP66
O-ring made of Nitrile Rubber (NBR)
Surface treatment
End cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
N° 2 entries M20x1,5. One plugged-off by Ex d brass nickel chrome plated plug and relevant gasket.
and screws
AISI304 Stainless steel external hardware and screws

EVF-P series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips TL-D or equivalent (lamps excluded)
High frequency electronic ballast conforming with EN 60079 – 18 and IEC 60079 – 18
Rated operation voltage (UE)
110 – 240 (normal service) - 230- 240 (Emergency service) 

0/50 – 60 Hz
Power factor
> 0,95

Accessories available
upon request

AISI304 Pole mounting kit / AISI304 Ceiling / Wall mounting kit / AISI304 Suspension mounting kit / 3° bottom entry M20x1,5 / AISI304 protection guard / Mounting kit in stainless steel AISI316

Operating principles

Available EVF-P lighting fixtures for emergency service of one tube:
- 90 minutes; guarantees 60’ duration with constant flux (emergency lumen factor 17%) and 30’ with decreasing flux
- 120 minutes (emergency lumen factor 10%)
- 180 minutes; constant flux (emergency lumen factor 9%)
Photometric light curves


Product certificates are available in our download section.