EVF-P

EVF-P
  • Complete range of explosion-proof linear lighting fixtures suitable for Zone 1, 2, 21, 22 and available with single or double lamp and ideal for applications where a continuous row of lighting is needed to ensure a uniform illumination of production sites and machinery. 
  • End-cups in copper-free aluminium granting a high resistance to corrosive environments 
  • Threelayers-extrusion lamp housing: Polycarbonate layer; Top side reflecting layer which protects inner electrical and electronic apparatus from direct sun heating/ radiation effect; Filter layer which protects inner polycarbonate layer against UV radiation and related yellowing effect. 
  • Circular shape grants the best possible “CX” factor, therefore it is less affected by wind-dusts, pollution and dirty bunching. 
  • Possibility to apply an OFF-SHORE painting cycle suitable for marine environments. 
  • All lighting fixtures are supplied ready for LOOP IN-LOOP OUT facility with cable up to 4 mm².

TECHNICAL FEATURES

Material  
 		 End cups in aluminium with low content of copper / Light housing in polycarbonate
 
IP rating
 		 IP66/IK10 according to EN 62262:2002
 
Ambient temperature range -20°C to +55°C
Approvals
 

INERIS 02ATEX0039X (standard) / TR CU (marking upon request, ordering code to be required)
 
Marking
II 2 GD
Ex e mb IIC T4 Gb (Normal service) / Ex d e mb IIC T4 Gb (Emergency service)
EX de IIC T4 Gb (available upon request)
Ex tb IIIC T85°C Db IP66
 
Gaskets
 		 O-ring made of Nitrile Rubber (NBR)
 
Surface treatment
 
End cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
 
Entries
 
N° 2 entries M20x1,5. One plugged-off by Ex d brass nickel chrome plated plug and relevant gasket.
 
Hardware
and screws		 AISI304 Stainless steel external hardware and screws
 
Lamps

 
EVF-P series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips TL-D or equivalent (lamps excluded)
 
Ballast
 		 High frequency electronic ballast conforming with EN 60079 – 18 and IEC 60079 – 18
 
Rated operation voltage (UE)
 		 110 – 240 (normal service) - 230- 240 (Emergency service) 


 
Frequency
 		 0/50 – 60 Hz
 
Power factor
 		 > 0,95
 

Accessories available
upon request
 

AISI304 Pole mounting kit / AISI304 Ceiling / Wall mounting kit / AISI304 Suspension mounting kit / 3° bottom entry M20x1,5 / AISI304 protection guard / Mounting kit in stainless steel AISI316
 
Operating principles



 
Available EVF-P lighting fixtures for emergency service of one tube:
- 90 minutes; guarantees 60’ duration with constant flux (emergency lumen factor 17%) and 30’ with decreasing flux
- 120 minutes (emergency lumen factor 10%)
- 180 minutes; constant flux (emergency lumen factor 9%)
 
Photometric light curves

DOWNLOAD THE DOCUMENTATION

Product certificates are available in our download section.