FL

FL
Due to the body made of aluminium with low content of copper and tempered glass, FL.. Series floodlights, provided in a wide range of wattage and power, are ideally suited for ON and OFF-SHORE applications and all kinds of industries where there is a high level of corrosion, mainly for lighting wide areas.
To increase further surface protection, upon request it is possible to apply an OFFSHORE painting cycle suitable for marine environments.
Standard floodlights are manufactured with symmetrical narrow beam reflector and symmetrical wide beam reflector upon request (ordering codes upon request).
For ease of installation and maintenance, the luminaire features an integral Ex e connection box and AISI304 stainless steel universal mounting bracket.

TECHNICAL FEATURES

 
Material  
 
Aluminium with low content of copper
Stainless steel AISI316L (ordering codes upon request)
 
IP rating
 
IP66
 
Ambient temperature
range
 
-50°C to +55°C 
 
Approvals
 

INERIS 00ATEX0023X (standard) / TR CU (marking upon request, ordering code to be
required)
 

Marking 

 

II 2 GD
Ex de IIB+H2 T3 Gb
Ex tb IIIC T200°C Db IP66
 

Gaskets
 
Gasket made of Nitrile Rubber (NBR) on flat joint
 
Surface treatment
 

Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon
request) / Internal anticondensate painting / AISI316L version unpainted
 

Entries
 
N° 2 entries M25x1,5
 
Hardware and screws
 
AISI316L Stainless steel screws and AISI304 Stainless steel adjustable bracket
 
Lamps
 
Included
 
Rated operation
voltage (UE)

See table

 
Frequency
 
See table
 
Power factor 
 
> 0,95 
 
Accessories
 

N° 1 brass nickel chrome plated plug + N° 1 brass nickel chrome plated cable gland PNA
type c/w set of inner seals
 

Accessories available
upon request
 

Protection guard (not to be sold separately unless as a spare part)
Special brackets fo pole mounting
 

Options upon request

HOT INSTANT RESTRIKE solution available via twin-arc lamp assuring immediate hot instant restrike
ignition with flux that will reach 80% of the nominal lamp flux in about 3 minutes.
HOT INSTANT RESTRIKE solution also available via INSTANT RESTRIKE BALLAST, assuring
immediate hot instant restrike ignition with 80% of the lamp nominal flux in 7 seconds.
(for high pressure sodium version)
 

Photometric light curves

 

DOWNLOAD THE DOCUMENTATION

Product certificates are available in our download section.